Luxsky Lighting Co.,Limited

Tel:0086-755-82590839
Contact US
Address: C&H Building, Wanda Industrial Park, Shiyan Town, Bao'an district, Shenzhen City, China
TEL: +86-755-82590839
+86-755-33654459
FAX : +86-755-33654451
Home > Exhibition > Content
KAUST university research and development of nano AlGaN light-emitting devices, is expected to enhance the effectiveness of UV LED
- Aug 06, 2018 -

The researchers have made the nanoscale GRINSCH dipole by using the gradient refractive index distribution (GRINSCH) device to make the nanoscale dipole. The researchers expect to be able to apply it to the UV LED device in the future, such as laser, optical sensor, amplitude modulator, and the optical related devices of the product.

The existing AlGaN light emitting device is regarded as the UV lamp source to replace the existing UV gas laser and the UV lamp containing toxic substances. However, due to the UV laser diode in the device, the voltage is at least 25 volts, and the efficiency of the injection layer is not good, which leads to high series resistance, which leads to limited performance. The reason is related to the P type semiconductor coating on the AlGaN aluminum layer and the lack of effective cooling pipes.

Compared with the original AlGaN epitaxial thin film layer, the nanocrystalline AlGaN has an effective stress relaxation due to the high surface area to the volume ratio, which can be extended directly on the matrix including the metal. Metal and metal matrix coated with silicon or sapphire can provide a better heat sink for high current operation. In addition, because of the low demand for the activation energy of nanoscale P semiconductor because of the addition of magnesium, the resistance is relatively small. The GRINSCH diode has excellent electronic and optical performance, and requires lower voltage and series resistance than the original diode.

Motion Sensor LED Strip Light for Bedroom Lighting

DC12/DC24V LED Lighting RGB+Amber Strips