Luxsky Lighting Co.,Limited

Tel:0086-755-82590839
Contact US
Address: C&H Building, Wanda Industrial Park, Shiyan Town, Bao'an district, Shenzhen City, China
TEL: +86-755-82590839
+86-755-33654459
FAX : +86-755-33654451
Home > Exhibition > Content
What is the LED touch light?
- Jul 19, 2017 -

1 Introduction:

LED touch light is a kind of LED lights, especially bright, long life, very power, the battery produced in each lamp can usually use up to 100 hours. Put it on the table, posted on the wall, the ceiling, packed in the bag can be, very simple and convenient.

床底灯3.jpg 副本.jpg

2 Accessories:

Lamp-socket and a lamp body, the luminous body is arranged in the lamp body, the lamp bodyis arranged in the lamp holder, and the light source and / and an adhesive layer, and the magnet is a piece of the magnet which is embedded in the bottom of the bottom surface of the socket, and the adhesive layer  is made of double-sided adhesive.

3 Principle:

Compared with the prior art, the utility model is provided with a magnet or an adhesive layer on the bottom surface of the lampholder so that the iron lamp of the lamp holder can be fixed at any position, and on the non-iron machine, Glue is fixed and easy to fix, the above two ways, not only can be fixed on the vertical wall and plane, but also fixed on the top, so the fixed location is not restricted, effectively increasing the application of touch lights range.

4 main specifications / special features:

Power consumption: 0.2 to 0.4W

Luminous flux is 10 to 15 lumens Enclosure Available colors: yellow, black and purple

LED Available colors: white (5,000 to 7,000K)

LED number: 6

Battery Category: 3 x AAA (not included)

The back with 3m tape, easy to install

Aluminum shell

Wide viewing angle bright white LED as a light source, with three different lighting effects within the wire

When the LED is lit, it sends out a narrow beam of light

Can be used for long distance lighting (similar to flash function)

When the outer LED is lit, a wide beam of light is emitted

Can be used for short distance lighting (similar to ordinary lighting)

6 LED all lit, can be used for wide-angle long-distance lighting

5 Operating Instructions:

Press the middle PVC cover

The first three LEDs are lit when the first press is pressed

When the second press, the external 3 LEDs are lit.

When the third press, all six LEDs are lit.

When the fourth press, all LEDs are turned off

LED wardrobe sensor night light .jpg

6 Features:

1. Applicability, in a variety of indoor and outdoor harsh environment, the adaptability and reliability have improved

2. Colorful: composed of three primary colors (red, green, blue) display unit box, so that the electronic screen to achieve rich color, high saturation, high resolution, high frequency display dynamic images

3. High brightness: the use of ultra-high brightness LED, the sun is still under the long-range light is still visible

4. Good effect: the use of non-linear correction technology, the image clearer, more layered sense

5. High reliability: static scanning technology and modular design technology, reliability, stability, higher

6. Display mode diversification: Supports multiple display modes

7. Easy to operate: adopt a common video playback software, the system operation is very convenient

best selling led products :

1.2m High Brightness Seamless-joint Office Linear Module Lighting Fixtures

120cm 240W LED Linear High Bay

1.2 Meters Continuous Line Lighting System For Supermarket Warehouse 130lm/W LED Continuous Linear Lighting System

1.2m Single Flat Oil Station Pendant Linear Lamp

120cm 300W LED Linear High Bay

www.luxsky-light.com