With the glass curtain wall as a building facade in the form of gradually increased, within the light through the lighting practices are being used by more and more lighting designers.
With the glass curtain wall as a building facade in the form of gradually increased, the light through the lighting practices are being used by more and more lighting designers.
Use the internal light alone
Single light source
In each window set up a light source, so that the light source directly out of the window, the light source can be dotted or linear, through the entire building all the window lighting effect combination to form the overall building night, unit lighting composition is relatively simple, Small building.
In each window set up more than light source, and combined into a pattern, so that the light directly through the window, this method makes the unit light composition with the content, but also makes the overall architectural night more level and change, suitable for slightly larger buildings Use on board.
Ceiling installation of lamps
In the vicinity of the window at the ceiling set up lamps, illuminate the window near the ceiling and wall, and the room was illuminated within the weakened lighting arrangements, the formation of the window from the window to the depth of the brightness of the room showed a strong fade from the weak change, this approach Can make people through the window of the lighting effects change the experience of the room and building depth.
In different parts of the building is divided into light and outside the cast light
Some of the main facades of the building are large fence of the hidden wall of the glass curtain wall, only the top structure, the bottom of the podium or border and other local facades for the real wall form, in this case, you can in the building of the glass curtain wall part of the design of light transmission , While in the real wall part of the design outside the cast light lighting, the formation of a contrast effect.