Luxsky Lighting Co.,Limited

Tel:0086-755-82590839
Contact US
Address: C&H Building, Wanda Industrial Park, Shiyan Town, Bao'an district, Shenzhen City, China
TEL: +86-755-82590839
+86-755-33654459
FAX : +86-755-33654451
Home > Exhibition > Content
What is the number of LED dead light in the end?(I)
- May 25, 2017 -


According to large data show that the LED dead light may be more than 100 reasons, limited to time, today we only LED light source, for example, from the LED light source of the five major raw materials (chips, stents, phosphor, Packaging glue and gold line) to start, introduce some of the reasons that may lead to dead lights.

Today, we LED die as an example, to analyze the number of reasons:

To failure analysis of large data show that LED dead light may be more than 100 reasons, limited to time, today we only LED light source, for example, from the five major sources of LED light source (chip, bracket, phosphor, solid crystal, And gold line) to start, introduce some of the reasons that may lead to dead lights.

Chip

1.Chip anti-static ability is poor

LED lamp beads of anti-static indicators depends on the LED light-emitting chip itself, and packaging materials are expected to package technology has nothing to do, or the impact of factors is very small, very subtle; LED lights are more susceptible to electrostatic damage, which is the distance between the two pins Relationship, LED chip die spacing of the two electrodes is very small, usually within a hundred microns, and the LED pin is about two millimeters, when the electrostatic charge to transfer, the greater the spacing, the more likely to form a large potential difference , That is, high voltage. Therefore, the closure of LED lights are often more prone to electrostatic damage accident.

2.Chip epitaxial defects

LED epitaxial wafers in the high temperature process, the substrate, MOCVD reaction chamber residual sediment, peripheral gas and Mo source will introduce impurities, these impurities will penetrate the epitaxial layer, to prevent gallium nitride crystal nucleation, the formation of various A variety of epitaxial defects, and ultimately in the epitaxial layer surface formation of small holes, which will seriously affect the epitaxial wafer film material quality and performance.

3. Chip chemical residues

Electrode processing is the key process for making LED chips, including cleaning, evaporation, yellowing, chemical etching, fusion, grinding, will come into contact with a lot of chemical cleaning agent, if the chip is not clean enough, will make harmful chemical residues. These harmful chemicals will be in the LED power, and electrochemical reaction with the electrode, resulting in dead lights, light failure, dark, black and so on. Therefore, the identification of chip chemical residues on the LED packaging plant is essential.

4.The chip is damaged

LED chip damage will lead directly to LED failure, so improve the reliability of LED chips is essential. During the evaporation process, it is sometimes necessary to fix the chip with a spring clip, thus creating a clip. Huangguang operation if the development is not complete and the mask has a hole will make the light area has more residual metal. Grain in the previous process, the process such as cleaning, evaporation, yellow, chemical etching, fusion, grinding and other operations must use tweezers and flower baskets, vehicles, etc., so there will be grain electrode scraping situation.

Chip electrode on the solder joint: chip electrode itself is not solid, resulting in solder wire after the electrode off or damage; chip electrode itself poor solderability, will lead to solder ball solder; chip storage will lead to improper electrode surface oxidation, surface contamination And so on, the slight contamination of the bonding surface may affect the diffusion of metal atoms between the two, resulting in failure or Weld.

5.the new structure of the chip and the source material is not compatible

The new structure of the LED chip electrode with a layer of aluminum, the role of the electrode in the formation of a layer of mirrors to improve the efficiency of the chip, followed by a certain extent, reduce the amount of gold used in the deposition electrode to reduce costs. But aluminum is a relatively lively metal, once the packaging plant lax control, the use of chlorine exceeded the standard glue, gold electrode in the aluminum reflective layer will react with the chlorine in the glue, resulting in corrosion.

LED bracket

led flood light..jpg

http://www.luxsky-light.com

 

Hot products:Microwave sensor lightceiling mounted light bar48W Panel lightGarden street lightPanel light outdoorLED profile lighting fixtureCommercial lighting