Frosted Lens IP65 Waterproof Tri-proof Light

Luxsky Lighting Co., Limited is one of the leading manufacturers and suppliers of Frosted Lens IP65 Waterproof Tri-proof Light in China, featured by quality products and low price. If you're going to wholesale advanced loghting products made in China, welcome to get pricelist from our factory. Customized service and 5 years warranty are available.

      The Frosted Lens IP65 Waterproof Tri-proof Light is designed for indoor and outdoor areas where lighting fixtures need protection against dust, moisture, and impact. It belongs to the LS-11-LLD4 series and features a 6063 aluminum housing with a frosted PC cover.

      Available in 120cm and 150cm lengths, the series offers several wattage options for different installation requirements. The aluminum body helps dissipate heat, while the frosted cover provides diffused light with a 120° beam angle.

      With IP65 protection and an IK10 impact rating listed for the series, this tri-proof light is suitable for workshops, factories, warehouses, parking areas, and other demanding environments. Recessed ceiling mounting is not required; the fixture can be surface mounted, wall mounted or suspended using the appropriate accessories.

      The frosted PC lens helps diffuse light evenly across the illuminated area, creating a softer lighting effect and reducing direct glare compared with a clear cover. It is suitable for commercial and industrial environments where comfortable, evenly distributed lighting is preferred.

      With a 120° beam angle, this tri-proof light provides wide light distribution for everyday general lighting applications.

      Designed for environments exposed to moisture, dust and water splashes, this IP65 waterproof tri-proof light provides protection against dust ingress and water jets from any direction when properly installed.

      Its sealed housing and built-in waterproof LED driver make it a practical lighting option for workshops, warehouses, parking areas and other damp or dusty indoor environments.

      For installation in specific outdoor or harsh environments, please confirm the operating conditions and installation requirements with our team.

      The 120cm model is available in 40W, 48W and 60W versions, while the 150cm model is available in 48W, 60W and 72W. Please refer to the model number when confirming the required length and power.

• Factories and Workshops

Suitable for production areas, assembly lines and workshop spaces where lighting fixtures may be exposed to dust and moisture.

• Warehouses and Logistics Facilities

Can be installed in storage areas, loading zones and distribution facilities that require reliable general lighting.

• Parking Areas

Suitable for indoor parking garages and covered parking spaces where moisture and dust protection are required.

• Supermarkets and Commercial Facilities

Can be used in service areas, back-of-house spaces and other commercial areas that need practical linear lighting.

• Refrigerated and Humid Areas

Suitable for selected cold-storage and humid environments, provided the fixture's operating temperature and installation conditions meet the project requirements.

• Aquariums and Plant Facilities

Can be considered for suitable service and working areas. The lighting requirements of the specific environment should be checked before selection.

The LS-11-LLD4 tri-proof light supports different mounting arrangements for commercial and industrial spaces.

• Surface Mounting: Fixed directly to a suitable ceiling surface.
• Wall Mounting: Installed on a suitable wall surface where the lighting layout requires it.
• Suspended Mounting: Hung from the ceiling using the appropriate suspension accessories.

Before installation, check the mounting surface, fixture dimensions and accessory requirements. For damp or industrial environments, cable entries and electrical connections should also be installed and sealed according to the product instructions.

Suspended

      Luxsky supports OEM requirements for LED tri-proof lights, working with distributors, contractors and project buyers on product configurations for different installation environments.

1. What You Can Customize

Depending on the selected model and production availability, the following options can be discussed:

• Length: 120cm and 150cm standard models.
• Wattage: 40W, 48W, 60W and 72W options, depending on length.
• LED Chips: 2835 or 5630 SMD LED options, subject to availability.
• Color Temperature: 3000K, 4000K, 5000K and 6000K.
• Housing Color: Silver or white.
• Installation: Surface mounted, wall mounted or suspended, with suitable accessories.
• Driver: Driver configuration according to the required input voltage and project specifications.
• Logo: OEM logo and product labeling, subject to order requirements.
• Packaging: Customized packaging for bulk orders.

2. MOQ, Samples and Lead Time

• MOQ: Order quantities can be discussed according to the selected length, wattage and configuration.
• Samples: Samples can be arranged for checking the housing, cover and lighting performance before bulk purchasing.
• Lead Time: Production time depends on order quantity, selected specifications and material availability. A confirmed schedule will be provided after the order details are finalized.

      For project inquiries, please share the required length, wattage, color temperature and estimated quantity.

3. Quality Control Before Shipping

      Inspection requirements can be arranged according to the product configuration and order specifications.

Checks may include:

• Appearance Inspection: Checking the aluminum housing, PC cover and overall assembly.
• Electrical Testing: Checking input voltage and basic electrical operation.
• Lighting Test: Checking LED operation and light output.
• Protection and Assembly Checks: Checking housing assembly, cover fitting and cable entry components.
• Final Inspection: Checking product quantity, accessories, labeling and packaging before dispatch.

For bulk orders, specific inspection requirements can be discussed before production.