LED Microwave Motion Sensor panelwith 18W, 36W,40W,40W
※Features:
Microwave Motion Sensor Dim LED Panel is a new product series of Luxsky Lighting, which not only
keeps the traditional panels' brightness, functions and features, but also the following nice features:
1.Make the functions of microwave motion sensor, daylight sensor and LED driver together;
2.Special design makes LED driver suitable to fix within LED Panel and tri-proof light;
3.Detection area, time delay & daylight threshold can be precisely set through DIP switch;
4.Automatic switching and dimming based on motion & light level;
5.Install method: suspended/ceiling mounted/recessed;
6.With TUV CE, RoHs, FCC approval, 3 years' warranty.
※Application:
Motion sensor dim LED Panels are mostly used for the places:
1.Office lighting for office and meeting rooms,
2.Public lighting for class rooms, reading rooms,
3.Commercial lighting for supermarket assistant lighting,
4.Residential lighting: villa.
※Detection Ways:
Wall mounted way(m) Ceiling mounted way(m)
Installation height: 1-2M Installation height: 3-6M
※Motion Sensor panel Specification:
| Part No. | CCT | Size L*W*H | Power | Lums | Dim Sensor | CRI | PF | IP rate |
| LS-01-PL3030-18W | 2800-6500K | 295x295*9mm | 18W | 1500lms | Motion sensor | >80Ra | >0.9 | IP40 |
| LS-01-PL3030-24W | 2800-6500K | 295x295*9mm | 24W | 2000lms | Motion sensor | >80Ra | >0.9 | IP40 |
| LS-01-PL5959-36W | 2800-6500K | 595x595*9mm | 36W | 3600lms | Motion sensor | >80Ra | >0.9 | IP40 |
| LS-01-PL5959-40W | 2800-6500K | 595x595*9mm | 40W | 4000lms | Motion sensor | >80Ra | >0.9 | IP40 |
| LS-01-PL5959-48W | 2800-6500K | 595x595*9mm | 48W | 4800lms | Motion sensor | >80Ra | >0.9 | IP40 |
| LS-01-PL3012-36W | 2800-6500K | 295x1195x9mm | 36W | 3600lms | Motion sensor | >80Ra | >0.9 | IP40 |
| LS-01-PL3012-40W | 2800-6500K | 295x1195x9mm | 40W | 4000lms | Motion sensor | >80Ra | >0.9 | IP40 |
| LS-01-PL3012-48W | 2800-6500K | 295x1195x9mm | 48W | 4800lms | Motion sensor | >80Ra | >0.9 | IP40 |
| LS-01-PL6012-40W | 2800-6500K | 595x1195x9mm | 40W | 4000lms | Motion sensor | >80Ra | >0.9 | IP40 |
※Motion Sensor panel Functions:
1. "Off"&"On" function Application:
"Off "when enough lighting "On "when no enough lighting Dimming after holding time
if no motion to be detected
2. "Three-Step" dimming function Application:
"Off "when enough lighting "On "when no enough lighting 20% or 35% brightness LED Panel will be offs after
after hold time if no detection standy-by time without person
※Motion Sensor Parameters:
 | Detection Zone Max.(D*H): 16m*6m; Detection Sensitivity: 10%/50%/75%/100%; Holding Time: 10s/90s/3min/10min; Corridor Function: 0s/30s/10min/+ ; Daylight Sensor: 5lux/16lux/50lux/disable; Stand-by Dimming Level: 20%/35%; Motion Detection: 0.5-3m/s; Mounted Height: Max. 6Meters; Detection Angle: 360 (ceiling installation); Working Temperature: -20 C-50 C Ip Rate: IP20 |
※Setting for LED Motion Sensor:
Detection Area | 1. Detection area can be reduced by selecting the combination on the DIP switches to fit for precisely each application |
Holding Time | 2. According to the time period, LED Panel remains 100% brightness after motion is not detected. |
Daylight Sensor | 3. Sensor can be set to only allow the panels to light below a defined ambient brightness threshold. When set it to be Disable mode, daylight sensor will switch on the panel; when motion is detected regardless of ambient light level. 50lux: twilight operation, 15lux, 5lux: darkness operation only. |
Corridor Function ( Stand-by Period) | 4. According to time period, Led panel keeps a low light level before it completely switches off when person leaves for a long time. When set"+∞ ", the low light is maintained until motion is detected. When set "0s", the light will turn off after holding time |
Stand-by dimming Level | 5. The low light level that you want after no person is there for a long time. |
