Nowadays, solar street lights are used in more and more places. Solar street lights can be seen everywhere in cities and rural areas, and their advanced nature is increasingly highlighted. With the widespread use of solar street lights, many consumers want to know how to assemble solar street light poles. There are mainly the following steps to assemble solar street lights
1. Check whether the model of the light pole at the installation location is correct (such as single-head, double-head), and match the corresponding length and short arm; cut the appropriate wire to the corresponding position, and generally reserve 150MM at both ends of the stripped wire.
2. Install the jump arm and lamp head, determine the position and horizontality of the lamp, and use the lamp pole as the reference.
3. After wiring, check whether the lamp line is tight and firm.
Ruori Sunshine Lighting | Assembly method of solar street light pole
4. Connect the light source and threading, connect the wire correctly according to the instructions, and pay attention to the positive and negative poles.
5. After connecting the wire, check whether the connection is firm. During the installation of the light source, pay attention to the projection surface of the light source to be perpendicular to the ground, not the installed arm surface.
6. After connecting the light source, first use a multimeter to test its resistance and whether it is grounded to the pole body, and then use a battery to test it to light up and confirm that the connection is correct.
The above is about the assembly method of solar street light poles. Solar street lights have good product integrity, price advantages, and are easy to transport and install. They can achieve certain lighting effects. They basically work with the timing dimming function of the controller or the human body sensing function of the controller. The battery is powered by a lithium battery with good charging cycle and deep discharge characteristics. A new street light product launched by our company has high light efficiency, low energy consumption, and dual modes of light control and timer control.
