一,The disparity in how much light is needed on rural and urban roadways
Before talking about the exact spacing, we need to make one thing clear: rural roads can't just use the same lighting standards as city roads.Most of the time, rural roads have these features:The road grade isn't very high; most of it is made up of village roads, branch roads, or connecting roads.There is a lot less traffic than on city roads.The speed of driving is rather slow.There aren't many light sources in the area, and street lamps are quite important.Not enough money for building and upkeepural road lighting focusses more on fundamental safety lights and usefulness than on high brightness and high illumination. When putting up LED street lights
二,A guide for the usual distance between LED street lights on country roads
Based on a lot of work on rural road lighting projects, the common distance between LED street lights on rural roads is usually in the following range:
20-25 meters: Road sections that need a lot of light, have a lot of foot traffic, or have complicated road conditions
25 to 30 meters: the most usual and useful way to set up a rural road
30–35 meters: Road portions with tiny roadways, little traffic, and not many people using them
When it comes to practical effectiveness and cost-effectiveness, the most common and reliable spacing range for LED street lights on rural roads is 25 to 30 meters. This is merely an empirical reference value
三, Important things that decide how far apart LED street lights should be on country roads
1. The effect of road width on the distance between lamps
The distance between lights is mostly based on the width of the road:
The road is 3 to 4 meters wide, which means that most of the roads and alleyways in the village are narrow and don't have a lot of illumination. It is best to make the spacing between lights smaller.
Road width of 4 to 6 meters: This is the most popular type of rural road, and there is plenty of room for choosing lamp spacing.
A single LED street lamp needs to cover a bigger area of lights the wider the road is. If you don't arrange the lamp spacing correctly, you could end up with difficulties like a bright centre and dark edges.
2. The range of power and brightness that LED street lighting can provide
The amount of light that LED street lights give off depends on their power, which also affects how far away they can effectively light up an area:
30W-40W LED street lights are good for narrow roads and alleys. They should be spaced 20–25 meters apart.
50W-60W LED street lights are good for most village roads and should be spaced 25–30 meters apart.
LED street lights with 80W to 100W power are good for broader roadways and can be made bigger to fit 30 to 35 meters.
Keep in mind that more power isn't always better. Too much power not only uses more energy, but it can also generate glare difficulties that make it harder to drive and walk at night.
3. The height at which street lamps are installed and how evenly they light up the area
1.The height of the installation and the distance of the lamp are closely related:Height of installation: 5 to 6 meters The range of radiation is not very wide, thus it works best for lamps that are close together.
6 to 7 meters high: the most usual setup on country roads, with good lighting coverage and evenness
Installation height of 7 to 8 meters: can increase the range of the light, making it good for lamps that are farther apart.
To make sure that the light stays on, it is normally best to space street lights no more than 4 to 5 times the height of the installation.
四, The effect of how the lights are set up
Some common ways to light up country roads are:
One-sided illumination: cheap, but the lighting isn't very even.
Interlocking fabric lights: cost-effective and good for most village roads
The symmetrical cloth lamp gives the best lighting effect, but it costs a lot.
varying ways of lighting need varying amounts of space. When lighting on one side, the lights normally need to be closer together. Staggered or symmetrical lighting can help spread them out.
五, Ideas on how far apart LED street lights should be on different kinds of country roads
1. The main routes in villages
Because there are so many people and cars on the major route, it needs a lot of illumination.
Power should be between 50W and 80W.
Height of installation: 6 to 7 meters
Good spacing is 25 to 30 meters.
2. Streets and alleyways in the village
Even if there isn't much traffic, safety at night is still important:
Power level recommended: 30W to 50W
Height of installation: 5 to 6 meters
A good distance is 20 to 25 meters.
3. Roads that connect rural areas and fields
Lighting density can be lowered properly when the frequency of use is low:
Suggested power: 40W–60W
t
