What Is the Right Installation Spacing for LED Street Lights on a Farm?

Nov 17, 2026

Leave a message

      As an LED street light manufacturer with more than twelve years of export experience, I have supplied lighting to farms, logistics parks, hospitals and industrial zones in the Middle East, Southeast Asia, Africa and South America. "How far apart should the poles be?" is one of the first questions farm buyers ask me, and there is no single number that fits every project. Spacing depends on pole height, wattage, beam type and road width. On a farm, long roads and long cable runs also make every extra pole expensive, so getting it right matters. Here is the method I share with my customers.

 

Start with the Basic Rule: 3.5 to 4 Times the Mounting Height

      For most roads, pole spacing is about 3.5 to 4 times the mounting height. A 6-meter pole usually means 21 to 24 meters between poles, and an 8-meter pole means about 28 to 32 meters. This gives a good starting point, but it must be checked by simulation. Good LED street lights for farms should come with real IES files, so your designer can confirm the result in DIALux before you order. These values are general references, so follow your local standard.

 

Adjust for Road Width and Layout

      Narrow farm paths of about 4 meters or less can use a single-side layout with 30W to 60W fixtures on 4 to 6 meter poles. Main farm roads carrying harvesters and heavy trucks usually need 100W to 150W on 8 to 10 meter poles, and for roads wider than about 8 meters, an opposite-side or staggered layout covers the full width better. A single-side layout on a wide road often leaves the far edge and the ditch dark, and this is a mistake I see often on site.

 

Match Spacing to Wattage and Beam Type

      A Type II beam suits narrow roads and shorter spacing, a Type III beam suits main roads and allows longer spacing, and a Type IV or Type V beam suits yards and open areas. Higher wattage allows longer spacing, but only up to a point. Do not stretch the spacing just to save poles, because uniformity matters more than peak brightness. Dark gaps between poles are where tractors miss ditches and workers are not seen.

 

Use Closer Spacing at Bends, Gates and Junctions

      Straight roads are easy. Bends, gates, bridges and junctions need extra attention. I usually reduce spacing by 20% to 30% at these points, or add a pole right at the junction, so the light level rises gradually before the turn. A tractor driver can also be dazzled, even for two seconds, so use cut-off optics and keep the tilt near zero degrees. Near livestock areas, aim light away from barn openings. Quality LEDs already save about 50% to 70% electricity compared with old sodium or metal halide lamps, and dimming or motion sensors add more on long, quiet roads. Solar versions can suit remote roads.

 

Choose a Supplier Who Can Support Your Design

      Correct spacing only works if the fixtures perform as tested. Dust, humidity, heavy rain and lightning are everyday risks on farms, so I recommend IP66, IK08 and surge protection of 6kV to 10kV. Replacing one fixture on a 6-meter pole means hiring equipment and stopping work, so I suggest an LED lighting supplier with 5 year warranty and a real factory behind it. As an LED lighting OEM manufacturer, we also customize wattage, beam angle, color temperature and branding for project buyers and distributors. Our quality standard includes:

  • Branded LED chips and drivers, 100% aging test before packing
  • Die-cast aluminum housing, IP66 / IK08, 6kV to 10kV surge protection, CE and RoHS certified, with real IES files and test reports for DIALux design

When a customer asks me for a 5-year warranty, I can say yes with confidence, because we test before shipment, not after complaints.

 

Conclusion

      The right spacing is usually 3.5 to 4 times the pole height, adjusted for road width, wattage, beam type and risk points, and confirmed by simulation. Our LED street lights are built with strict quality control, so they deliver the stable light your design promises, year after year.

      If you are planning a new farm project or upgrading an old one, choose Luxsky Lighting. Contact us today for a free DIALux layout and a competitive quote.

Contact now

info-2047-1092

 

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!