Advantage 1: The lamp body is very small, and the LED lamp is a very small and fine LED chip encapsulated in transparent epoxy resin, so it is very small and lightweight, which can save a lot of materials and space in production and application.
Advantage 2: The working voltage of LED lamps is generally only 2~3.6V, and the working current is only 0.02~0.03A. That is to say: it consumes no more than 0.1W, and the power consumption is more than 90% less than that of incandescent lamps with the same light efficiency, and more than 70% less than energy-saving lamps. Therefore, only LEDs can be called real energy-saving light sources!
Advantage 3: The sturdy and durable LED wafer is completely encapsulated in epoxy resin. The small epoxy resin particles are extremely difficult to break, and there is no loose part of the whole lamp body; The wafer inside is extremely difficult to break, and there are few thermal effects that may volatilize and fuse. These features make LEDs very difficult to damage. Compared to ordinary light bulbs and fluorescent lamps, LEDs are impregnable, countless times stronger and more durable.
Advantage 4: Long service life of LED lampsUnder the appropriate current and voltage, the service life of LED lamps can reach 100,000 hours, that is, the product life reaches 10 years and has a longer service life than other types of lamps.
Advantage 5: Safe low-voltage LED lamps use low-voltage DC power supply (AC can be rectified to DC), and the power supply voltage is between 6~24V, which varies depending on the product. In short, it is used as a safer DC power supply than a high-voltage power supply, especially for homes and public places.
Advantage 6: Wide range of application Because it is small, each unit LED piece is 3~5mm square or round, so it is more suitable for the preparation of devices with complex modeling processes. For example, the manufacture of soft, bendable tubes, light strips, and special-shaped lamps is currently only suitable for LEDs.
Advantage 7： richer color, the color of the lamps on the market before is very single, in order to achieve the purpose of color, one is to brush the surface of the lamp with paint or cover the colored, and the other is to fill the lamp with inert gas to emit light, so the richness of the color is limited. LED is a digital control, light-emitting chip chip, currently can emit a variety of colors, including red, green, blue ternary color, it is with this ternary color, through the system control, can restore the colorful world.
Advantage 8：less heat dissipation LED is a more advanced cold light source, it is not like incandescent lamps, fluorescent lamps like a large amount of infrared and ultraviolet radiation, especially suitable for cultural relics, jewelry, high-end cosmetics and other valuables lighting. There is almost no thermal effect of electric current like incandescent lamps, and it will not be affected by thermal expansion and contraction. It will not cause the bulb to turn yellow, will not accelerate the aging of the lamp, and will not constitute a greenhouse effect on the surrounding environment.
Advantage 9: Less environmental pollutionLED for environmental protection is mainly manifested in three aspects: First, there is no harm of metal mercury. LED lamps do not use highly hazardous mercury like fluorescent lamps, and there are no public hazards such as mercury ions and phosphors that may leak during the bulb manufacturing process or after breakage. Second, the epoxy resin used to manufacture LED is an organic polymer compound, which has good physical and chemical properties after curing, has high bonding strength to products and metals, is hard and flexible, stable to salt and alkali and most solvents, and is not easy to damage, even if it is damaged or aged, it can be recycled and reused, and will not pollute the environment. Third, the particle layout of LED lamps and display screens generally produces scattered light and rarely produces light pollution. Advantage 10：the cost is more economical than the purchase price of incandescent lamps, fluorescent lamps and LED lamps. However, because the energy consumption of LED is particularly low, it can save a lot of electricity bills in the long run, and can save the investment in replacing lights, so the comprehensive use cost is more cost-effective.
Scope of application
LED ceiling light is suitable for long-term lighting in shopping malls, banks, hospitals, hotels, restaurants and other public places.
(1) It is suitable for both indoor and outdoor use, and can also play a decorative function.
(2) Advertising features.
(3) In terms of performance, it can add functions such as anti-theft, fire prevention, air purification, etc.
Product Features:
(1) The outer cover is made of acrylic material, with uniform light color, anti-glare and high light transmittance.
(2) Built-in power supply, easy to install.
(3) It can replace the traditional ceiling lamp.
(4) optional wireless remote control dimming, light control switch, voice switch, human body sensor switch and other functions, the lamp is suitable for corridors, corridors, toilets, guest rooms, corridors, toilets and other places.
