After more than twenty years in foreign trade, I have handled quite a few logistics-park lighting projects. Clients often ask: "How high should the street lights actually be installed?" If the height is too low, light coverage will be insufficient and dark spots are likely to appear; if it is too high, illuminance drops and glare may increase. Installation height is closely related to road width, fixture power, and optical design. Drawing from practical experience, here is a useful reference.
Road Width Is an Important Basis for Determining Height
Internal roads in logistics parks commonly range from 6 meters to 15 meters in width. As a general guide:
- For secondary roads or pathways 6–8 meters wide, installation height can be controlled at 6–8 meters;
- For main roads 8–12 meters wide, 8–10 meters is recommended;
- For wider roads over 12 meters or main channels for large trucks, 10–12 meters can be considered.
This is only an experience-based range. Actual selection still needs to be adjusted according to fixture power and light-distribution curves. Choosing an experienced LED street light manufacturer can provide more accurate height recommendations based on specific road conditions.
Height Must Match Power and Optics
At the same height, luminous efficacy and light distribution can differ significantly between products from different LED lighting OEM manufacturers. Fixtures with professional optics can maintain good road illuminance and uniformity even at a slightly higher mounting height. Simply raising the poles without adjusting the optical design can easily result in dark centers and brighter edges.
Balance Large-Truck Passage and Safety
Logistics parks have heavy trucks entering and exiting, so installation height must also consider vehicle clearance limits and driver visibility. Too low may interfere with large-vehicle passage; too high may leave illuminance insufficient. Experienced suppliers will take these factors into account and propose solutions that are both safe and practical.
Smart Control and Long-Term Stability Are Equally Important
Modern logistics parks place increasing emphasis on energy management. Choosing street lights with dimming capability allows automatic power reduction late at night. At the same time, selecting an LED lighting supplier with 5 year warranty provides better product stability and after-sales support, making long-term use more worry-free.
Recommend Calculation Based on Site Conditions Rather Than Guesswork
The most reliable approach is to perform a simple calculation based on road width, target illuminance, and fixture spacing, or to refer to successful cases from similar projects. Experienced manufacturers can usually provide more practical installation-height and fixture-selection advice.
Conclusion
The installation height of LED street lights on logistics park roads requires comprehensive consideration of road width, fixture performance, and traffic safety-not simply "the higher the better." Selecting a reliable LED street light manufacturer and a capable LED lighting OEM manufacturer-especially an LED lighting supplier with 5 year warranty-makes the solution more dependable. Luxsky Lighting specializes in LED street lights with stable quality and solid after-sales support. If you are designing or selecting lighting for logistics park roads, feel free to contact us directly for tailored installation-height recommendations and LED street light solutions-reliable products that help you get the lighting right.
