Which Farm Roads Suit Type II, Type III and Type IV Light Distribution?

Nov 17, 2026

Leave a message

      As an LED street light manufacturer with more than twelve years of export experience, I have supplied lighting to farms, logistics parks, hospitals and industrial zones in the Middle East, Southeast Asia, Africa and South America. Many farm buyers compare wattage and price, but forget to ask about the beam type. On a farm, the wrong beam pattern causes dark ditches, wasted power and light thrown into barns. Here is how I explain T2, T3 and T4 to my customers.

 

Type II (T2): Narrow Paths and Service Lanes

      A Type II beam is long and narrow. It spreads light mainly along the road, with limited coverage to the sides. This makes it a good choice for narrow paths to barns, water points and worker housing, usually within 4 to 6 meters of width. With 30W to 80W fixtures on 4 to 6 meter poles, LED street lights for farms with a T2 beam give even light along the route and keep spill light away from livestock areas. If the road is wider, T2 will leave the far side dark.

 

Type III (T3): Main Farm Roads and Entrance Roads

      A Type III beam is wider and projects light forward and to the side. It is the most popular choice for main farm roads, entrance roads and routes used by harvesters and heavy trucks, especially when poles stand on one side of the road. With 80W to 150W fixtures on 6 to 8 meter poles and 4000K color temperature, it gives good uniformity. Pole spacing of about 3.5 to 4 times the mounting height avoids dark gaps. For main roads, T3 is usually my first recommendation.

 

Type IV (T4): Yards, Gates and Open Edges

      A Type IV beam has a semicircular pattern, so it lights a wide area in front of the pole while the back side stays darker. This makes it useful along building edges, machinery yards, loading areas and gate areas, where you want light to fall toward the working area and not toward barns or neighbors. Typical choices are 100W to 200W on 6 to 10 meter poles. For large open yards or crossroads, Type V may work even better. A tractor driver can be dazzled, even for two seconds, so check glare with simulation.

 

Do Not Choose by Habit: Confirm with Simulation

      Beam type works together with pole height, spacing and road width. A T3 beam on a narrow path wastes light, and a T2 beam on a wide road leaves dark ditches. Always ask for real IES files and run a DIALux simulation, checking spill light toward livestock areas. Quality LEDs already save about 50% to 70% electricity compared with old sodium or metal halide lamps, and photocells, motion sensors and dimming add more, which matters on farms with long cable runs. Solar versions can suit remote roads. These values are general references, so follow your local standard.

 

Choose a Supplier Who Stands Behind the Product

      A beam pattern only works if the optics are accurate and the fixture lasts. Dust, humidity, heavy rain and lightning are everyday risks on farms, so I recommend IP66, IK08 and surge protection of 6kV to 10kV. Replacing one fixture on a 6-meter pole means hiring equipment and stopping work, so I suggest an LED lighting supplier with 5 year warranty and a real factory behind it. As an LED lighting OEM manufacturer, we also customize wattage, beam angle, color temperature and branding for project buyers and distributors. Our quality standard includes:

  • Branded LED chips and drivers, 100% aging test before packing
  • Die-cast aluminum housing, IP66 / IK08, 6kV to 10kV surge protection, CE and RoHS certified, with real IES files and test reports for DIALux design

When a customer asks me for a 5-year warranty, I can say yes with confidence, because we test before shipment, not after complaints.

 

Conclusion

      Use T2 for narrow paths and service lanes, T3 for main farm roads, and T4 for yards, gates and open edges, all confirmed by simulation. Our LED street lights are built with strict quality control, so they stay bright, stable and dependable for years.

      If you are planning a new farm project or upgrading an old one, choose Luxsky Lighting. Contact us today for a free DIALux layout and a competitive quote.

Contact now

 

info-2047-1092

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!